Metal Stamping Solutions: Enhancing Efficiency in Manufacturing

Postion: Home > Our Case > Stamping & Bending >

Metal Stamping Solutions: Enhancing Efficiency in Manufacturing
Product content

TOOLING · STAMPING · SECONDARY OPERATIONS

Custom Metal Stamping Solutions

Hongming Sheng manufactures stamped metal parts according to customer drawings, CAD files or approved samples—from tooling and sample validation to repeat production.

Since 2010Prototype to VolumeNDA Available

Send technical files by email:
info@hms1688.com

Leave Contact & Project Details

The inquiry form collects contact information and basic requirements only; it does not accept drawing attachments. Send PDF, STEP/STP or sample photos separately by email.

Is Stamping the Right Process?

Stamping is often considered when a part is made from sheet or coil and repeat quantities can support dedicated tooling.

Geometry can be blanked, pierced, bent, drawn or coined
Repeatability and production rate matter
Material utilization can be planned around the strip layout
Tooling investment can be balanced against forecast volume

Stamping is not automatically the lowest-cost route. For early prototypes or changing designs, laser cutting and bending may be more practical. We compare the route after reviewing geometry and quantity.

Applications We Support

Energy StorageBattery brackets, covers, supports and electrical hardware.

Power & ChargingContacts, terminals, shields and formed equipment parts.

AI & ElectronicsChassis brackets, clips, shields and connector components.

AutomationMounts, retainers, covers and repeat mechanical components.

AutomotiveBrackets and formed parts developed to drawing requirements.

Medical EquipmentEquipment components requiring defined edges and finishes.

Process Options

Progressive Stamping

Multiple cutting and forming stations operate in sequence, often for repeat production where volume supports the tool.

Single-Stage or Compound Dies

Useful for selected blanking, piercing or forming operations depending on part geometry and quantity.

Deep Drawing

Forms recessed or hollow shapes; material flow, corner radii, thinning and draw depth require review.

Materials & Secondary Work

Materials: stainless steel, carbon steel, aluminum, copper and brass
Operations: tapping, PEM insertion, welding, riveting and assembly
Finishes: plating, anodizing, powder coating, brushing and polishing as specified

From RFQ to Production

Drawing Review

Confirm material, thickness, geometry, tolerances, finish and quantity.

Tooling & Process Plan

Review die route, forming sequence, secondary operations and inspection needs.

Sample Approval

Check dimensions, fit, appearance and agreed functional requirements.

Repeat Production

Manufacture against approved drawings, samples and inspection criteria.

What to Send

2D drawing and 3D CAD file, if available
Material grade, temper and sheet thickness
Prototype quantity and forecast volume
Critical dimensions, burr direction and cosmetic faces
Finish, assembly, inspection and packaging requirements

Discuss Your Stamped Part

Leave your contact information through the form, then send drawings and technical requirements directly to the email below.

E-MAIL: info@hms1688.com

Request a Stamping Project Review

Related page: Sheet Metal Stamping Parts from Customer Drawings. Capability, tolerance and lead time depend on project review.

>>Click Back To Categories